YELLOW PORCELAIN ETCH is used for porcelain etching during reparation of the dentures, as well as for the etching porcelain
vaneers, crowns and inlays before their cementation.
Silane is applied on porcelain after etching, before use of bonding system in order to increase durability of bonding between resin and porcelain.
- Isolate the operation field with rubber-dam, apply small amount of etching preparation on the prepared and dried surface. After use screw the syringe with a safety plug
- Leave etching for 60 seconds
- Rinse ang dry the procedure spot precisely
- Embrocate silane into previously etched porcelain surface
Do not rinse! Dry with airflow.
Porcelain surface is ready for bonding system application
YELLOW PORCELAIN ETCH (hydrofluoric acid in gel) and SILANE allow reparation of the dentures in the dental office, directly in the patient’s oral cavity. The etch is used for porcelain etching during reparation of the dentures in the patient’s oral cavity, as well as for the etching of the porcelain vaneers, crowns or inlays before their cementation.
Silane is applied on the porcelain after etching and before use of bonding system.
Both preparations are packaged in handy syringes with suitable brush applicators.
Dense, gelly and yellow etch contains fluoric acid, buffered in such a way that no noxious vapours are leaching to the air (what is possible in case of etches intended for use by technicians). Thanks to that porcelain can be etched in the oral cavity of the patient. In case of using it in the oral cavity it is recommended to protect the soft tissues.